Thursday, August 02, 2007

Custom profiles

Today I am continung the colour management saga...

Getting a custom profile done for your printer using a particular paper allows you to get consistent colour results in your work. Unfortunately each profile only relates to one sort of paper and not necessarily even all the papers in the range. The profile I had done is for Hahnemuehle Photo Rag but will apply to some other papers in the Hahnemuehle range which have the same coating.

The major benefit of having a profile is that as long as your monitor is calibrated, it allows you to do so-called "soft proofs". This is a function in Photoshop (View>Proof Setup>Custom) which allows you to select the profile for your printer with the paper and to see on screen, with a high degree of accuracy, how your image will look when printed out. If you have a few different profiles for different papers, you can test which one you prefer. Even if you only have the one paper (like me at this stage) you can see what the print will look like without wasting expensive paper, and even edit it in the soft proof state. You do of course have to have a properly calibrated monitor for this to work (see here).

I should mention at this stage that almost all I've learnt about this has been through a Melbourne company, Image Science. Their website is well-written and thorough but understandable. The owner Jeremy is really knowledgable and helpful, and the support service he provides (to help dummies like me get their profile working properly!) is terrific! I'd also like to say that from what I've seen their prices are excellent!

So...in order to have a profile done, you download this image below:



It is provided with no colour profile and the next task is to print it on your desired paper.
Below is a photo of my print out. Remember, the colours you are viewing won't be exactly the same as me, because of differences between our monitors. Also, the camera I used has a colour profile of its own, and that will have impacted on the image!! Still, you should be able to see there is a significant difference between the colours as downloaded and as printed.





I posted this print-out off to Jeremy in Melbourne on a Friday morning and somehow he managed to email me my custom profile on Monday afternoon! Normally I wouldn't have expected mail from Brisbane to Melbourne to even arrive till Tuesday, so the turn around was brilliant.

Installing the profile is not hard, but I did have a bit more difficulty using it. You just have to be very particular about getting the settings right, but as I mentioned Jeremy very patiently helped me through this, and now I can say I am extremely happy with the results!



This is the soft proof using my new profile, and I am finding this relates extremely well to the printed image. So... at last....on to the fun part - my artist books...

Saturday, July 28, 2007

Monitor calibration



As I mentioned last post, I decided to bite the bullet and dive head first into the whole "monitor calibration/custom profile" deal in an effort to save time (and, I guess, money - in terms of paper and ink - eventually) and get on with my masters work.


I thought I'd share a little of what this has involved - minus the usual swearing that always accompanies installing any new device on a computer... The picture above shows the "Spyder" (only 3 legs tho') actually in the middle of the process. Before we got to this stage I had to turn off a lot of things - e.g. my firewall, Adobe gamma, my screensaver and some other things I couldn't find and had to ask my husband to locate for me.

Next, I followed the "wizard" to install the Spyder2Express software. That was reasonably simple, except there are a lot of very strict instructions about ambient light. This has to be constant for the duration of the test, not directly shining on your screen (i.e. no over lighting in the room, no desk lamp) and the usual lighting conditions you work under! The room I work in is on the western side of the building, but the house next door is reasonably close. This means that in the afternoons (when I do most of my work) the light changes quite radically over about and hour and a half until the sun is completely blocked by the neighbours house! Oh well! I pulled the blind (not my usual lighting conditions) and did the best I could. Finally, I could put the spyder in position on the screen, adjusted the counterweight (the round thing at the top) so it wouldn't fall off half way through and with one (or two) more clicks, it did its stuff!

In the picture above the spyder is "reading green samples". It worked its way through red and blue ones too (RGB) and then to my surprise also did grey and black. (see below) I guess my surprise shows how little I understand the process!

At the end, I could see a difference in the test image, but it didn't seem huge, which surprised me a bit considering the trouble I was having with printing my images. That meant that I was going to have to depend on the custom profile to make a big difference. Tune in for the next post to see whether I am to be disappointed or thrilled with the results....


Update 3rd AUG
After some discussion with Jeremy at Image Science, who sold me my Spyder, I realised I did not actually have the new monitor profile as created by the Spyder selected...no wonder I couldn't see much difference (is there any hope for me???) I am 'fessing up to this because I suspect I really am not the only one who has trouble with these things. After I went to Start>control panel>colour>profiles and installed the Spyder2Express, I actually did see more of a difference on the monitor...


Sunday, July 22, 2007

Emotional flip-flop!

It is amazing how things appear to swing around from seeming so positive and hopeful to feeling like they are completely beyond me. Not that much as changed, probably mostly my hormones (!) but I feel as if I need to take some drastic steps if I am to have a hope of completing the masters in time.

Last week I seemed to be recovering from my trip to Melbourne quite well. On Thursday I was able to do a "CFS-day" of work (=3-4 hours) and the same again on Friday. I was feeling quite pleased with my recovery and even though the work I did wasn't all that creative and inspiring, it was necessary.

I have decided to bite the bullet and buy a "Spyder" in order to calibrate my monitor properly. I am also getting a custom profile done for use on my printer with Hahnemuehle Photo Rag. This is the paper I have chosen for the book "Like Weather". All this should ensure that the colours I see are the colours that print, and while costing a bit [remember I'm a paid writer now ;() ] will save loads of time, paper and ink, not to mention grief.


So I spent Thursday and Friday working through the instructions, printing off the "target profile" which I posted off to Melbourne to await my custom profile. I also spent time tweaking images and text for "Like Weather", as suggested by my supervisor. It's all very slow, and I'm not done yet, but at least I felt I was on the move again.

Then yesterday morning I woke with a giant headache which did not let up until evening. The day was spent in bed, sleeping fitfully, not daring to move about in case I vomited, and trying not to worry about "lost time". Fortunately when I woke this morning the headache was gone and for a while I was so relieved I felt quite positive.

Some hours later, I am wondering how I can possibly manage to finish my masters work while keeping up with the various family obligations I have. I thought about going to Melbourne for a month to work solidly without interruption, but I don't know how I could afford the accommodation costs, and I'd need a space to work. Then I thought, maybe I could just say I'd gone to Melbourne. I could keep a low profile and really focus on working. But my husband and I aren't good liars, we're just not comfortable with it - there is no way we could keep it up for a month.

Hhm, family. It's not that you don't want to help, you just don't want your life taken over.