You might remember from this post that I was quite hopeful about the potential of these images. The de-bossed figure really appealed to me, and is something that could work nicely both on paper and on porcelain. So since then I’ve been working on the imagery in Photoshop, and then testing it by exposing small strips of solar plate and printing them.
I’ve run up against my usual problem which is being overly ambitious before I've developed the technical skills and know-how required. In the test above, the de-bossing is achieved by making a relief plate and running it through an etching press. This is a step beyond making an ordinary relief print, and I managed to confuse myself for a while, although I did eventually work out what was happening.
In addition, I think I was trying to get too much happening at once, with not enough general printmaking experience and very little solarplate experience. This makes it difficult for me to visualize exactly how things on a plate will appear when printed. Below is the image I 've been working on, hoping to achieve the clouds popping out from the page, the figure de-bossed into the page and the sky floating somewhere in between these two.
To achieve this type of tonal range you need to use a double exposure, which I had learnt at the workshop I wrote about before. First, you expose an aquatint screen, followed by the image. I am exposing using sunlight, but even in winter here we reach a UV level of 4 most days, so there hasn't been any problem with UV intensity. I tested 3 different exposures before I was satisfied that I had developed sufficient detail.
And below is the result:
Left: printed with Charbonnel soft black etching ink
Right: printed with block ink made from Georgian block printing medium and alkyd paint




